Stabilised Chlorine Granules
Stabilised chlorine granules are commonly used for pool & spa chlorination. These stabilised chlorine granules are ideal for daily dosing of your swimming pool or spa, to produce free active chlorine which kills bacteria and other potentially harmful organisms. They are rapid dissolving and have minimal impact on pH. So opt for our best quality chlorine granules to keep your pool & spa hygienic and bacteria free.
Application Instructions
1. Maintain pH levels within the ideal range 7.2 - 7.6. If the level is not in this range, adjust.
2. Maintain free chlorine residuals within the range Pools: 1 - 3mg/l (ppm); Spas: 3 - 5 mg/l (ppm). * Freshly filled spas require initial shock or start up dose of 50mg/l (ppm) for 1 hour or 20mg/l (ppm) for 2 hours.
3. This product may be applied directly to pools and spas where temperatures exceed 20ºC. If below this temperature or in doubt pre-dissolve this product in a clean plastic container at a maximum rate of 100g of product per 2.2 gallons (10l) of water. Stir well to ensure the product is fully dissolved. Add the resulting solution to the pool or spa whilst the pump(s) are turned 'on' preferably near the water inlets to aid distribution.
4. Repeat dose application if necessary to achieve levels in point 2 above.
5. It is recommended that you periodically (e.g. weekly/fortnightly) shock or oxidise your water, using shock or oxidiser products, to eliminate any excess contamination.
|
